anzhuangyuanxing

Start installation

•  Measure the distance between the two hooks with tape measure
•  Draw a flat line on the wall with a pencil, the point ofintersection s where the hole is punched
•  Drill two holes of 0.23-0.31 inches in diameter and 1.98 inchese in depth at arranged position.
•  Use a hammer to hammer the expansion screw into the hole
•  Put the metal screws into the plastic expansion screws
•  Raise the mirror, making sure hat the nail inset into the hook and carefully lower the mirror

Start installation

• Measure the distance between the two hooks with tape measure
• Draw a flat line on the wall with a pencil, the point ofintersection s where the hole is punched
• Drill two holes of 0.23-0.31 inches in diameter and 1.98 inchese in depth at arranged position.
• Use a hammer to hammer the expansion screw into the hole
• Put the metal screws into the plastic expansion screws
• Raise the mirror, making sure hat the nail inset into the hook and carefully lower the mirror